Copper-coated step index multimode optical fibers
(Low OH)
Description
Datasheet

Copper-coated step index multimode optical fibers have all the benefits of silica fibers. Additional significant improvements include increased mechanical strength and greater fatigue resistance compared to non-hermetic and polymer-clad fibers (PCS). Their transmittance covers a spectral range of 400 to 2200 nm, and also remains stable in corrosive chemicals that normally react to silica glass. The temperature range is from -196C to +600C . Hermetically metal-coated optical fibers are the optimum candidate when used in high vacuum and harsh environmental conditions

FEUTURES:

-Greatly enhanced resistance to high power laser radiation.

-Higher core-to-clad ratio and enlarged NA optimized for coupling to high-energy lasers.

-Better fiber cooling due to the heat-conducting metal coating.

-Excellent mechanical strength and flexibility compared to polymer coated fibers.

-The metal coating can be soldered and will not outgas.

...

 

Copper-coated step index multimode silica fibers ОК-50/125Cu ОК-110/125Cu ОК-200/220Cu ОК-300/330Cu ОК-400/440Cu ОК-600/660Cu ОК-800/880Cu
Fiber type multimode multimode multimode multimode multimode multimode multimode
Index profile Step Step Step Step Step Step Step
Core diameter, µm 50 ± 3 113 ± 2 200 ± 2 300 ± 4 400 ± 5 600 ± 8 800 ± 10
Clad diameter, µm 125 ± 3 125 ± 2 220 ± 2 330 ± 4 440 ± 5 660 ± 8 880 ± 10
Coating diameter, µm 160 ± 10 160 ± 10 280 ± 10 420 ± 10 545 ± 10 775 ± 10 980 ± 10
Cladding offset, % < 2
Coating offset, % < 5
Attenuation at 800/1300 nm1, dB/km (See grapf Low OH) 14 the loss spectrum in the long wavelength region ( > 1um) is higher than that of the material the loss spectrum is close to the material loss spectrum
Wavelength range, nm (See grapf Low OH) 1000 - 1600 400 - 1100 400 - 1700 400 - 2200
Coating material Copper 99,99%
Core material Pure syntetic silica (low OH)
Clad material Doped silica (F-doped)
Additional inner layer Carbon
Numerical Aperture (NA) 0.16 ± 0.02 0.22 ± 0.02
Short-term bending radius 60 times the fiber diameters
Long-term bending radius 120 times the fiber diameters
Proof test, kpsi 100
Min operating temperature2,3, C -196
Max operating temperature (short time < 60s)2, C 600
Max operating temperature (long time > 60s)2, C < 400
Permissible rate of temperature change in the temperature range, C/min 5
1- under normal climatic conditions
2- in inert environment
3- at the minimum operating temperature, the integrity of the optical fiber is guaranteed
If you are interested in purchasing our products you can write to us!
Ask a question